CJKZR - 201 MULTI-PUROSE GEAR LUBE

  • MSDS: CJKZR
  • Manufacturer: SOUTHWESTERN PETROLEUM CORP
  • Product Name: 201 MULTI-PUROSE GEAR LUBE
  • National Stock Number: 9150-01-345-6139
Product Identification

Product ID:201 MULTI-PUROSE GEAR LUBE
MSDS Date:04/28/1997
FSC:9150
NIIN:01-345-6139
Status Code:A
MSDS Number: CJKZR

Responsible Party
SOUTHWESTERN PETROLEUM CORP
534 N MAIN ST
FORT WORTH, TX 76106
US

Emergency Phone: 817-348-7235

Info Phone: 817-348-7235

Cage: 14392

Contractor
SOUTHWESTERN PETROLEUM CORP
961005 FORT WORTH, TX 76106 US

Telephone: 817-348-7235

Cage: 14392

Ingredients

PETROLEUM LUBRICATING OIL BASE STOCK

CAS: 64742-57-0

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


PETROLEUM LUBRICATING OIL BASE STOCK

CAS: 64742-62-7

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


PETROLEUM LUBRICATING OIL BASE STOCK

CAS: 64742-54-7

RTECS: PY8035500

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


PETROLEUM LUBRICATING OIL BASE STOCK

CAS: 64742-65-0

RTECS: PY8038500

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


PETROLEUM LUBRICATING OIL BASE STOCK

CAS: 64742-55-8

RTECS: PY8036500

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


PETROLEUM LUBRICATING OIL BASE STOCK

CAS: 64742-56-9

RTECS: PY8039500

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


PETROLEUM LUBRICATING OIL BASE STOCK

CAS: 64741-88-4

RTECS: PY8040500

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

Hazards

Health Hazards Acute and Chronic:TARGET ORGANS: NOT PROVIDED. ACUTE -
INHALATION: VAPOR INHALATION UNDER AMBIENT CONDITIONS. IS NORMALLY
NOT A PROBLEM. EYE CONTACT: IRRITATION MAY OCCUR. SKIN CONTACT:
PROLONGED AND REPEATED CONTACT H AS PRODUCED MILD IRRITATION AND
INFLAMMATION. INGESTION: LOW ORDER OF ACUTE ORAL TOXICITY, BUT
MINUTE AMOUNTS ASPIRATED INTO THE LUNGS DURING INGESTION MAY CAUSE
MILD TO SEVERE PULMONARY INJURY AND PO SSIBLY DEATH. SUMMARY OF
ACUTE HAZARD: NOT EXPECTED TO PRESENT A SIGNIFICANT HEALTH HAZARD
UPON SHORT TERM EXPOSRE. SUMMARY OF CHRONIC HAZARD: PROLONGED
AND/OR REPEATED CONTACT MAY PRODUCE MILD SKIN I RRITAITON AND
INFLAMMATION.
Effects of Overexposure:IRRITATION, SKIN INFLAMMATION, MILD TO SEVERE
PULMONARY INJURY AND POSSIBLY DEATH
Medical Cond Aggravated by Exposure:PERSONNEL WITH PRE-EXISTING SKIN
DISORDERS SHOULD AVOID CONTACT WITH THIS PRODUCT.

First Aid

First Aid:NHALATION: REMOVE TO FRESH AIR. IF BREATHING DIFFICULTIES
PERSIST, OBTAIN MEDICAL ATTENTION. EYE CONTACT: FLUSH WITH WATER
FOR 15 MINUTES, IF PAIN OR REDNESS PERSISTS, OBTAIN MEDICAL
ATTENTION. SKIN C ONTACT: WASH WITH SOAP AND WATER AFTER WIPING OFF
EXCESS MATERIAL. INGESTION: DO NOT INDUCE VOMITING. CALL A
PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point Method:COC
Flash Point:=179.C, 354.2F
Autoignition Temp:>260.C, 500.F
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, FOAM, OR CARBON DIOXIDE
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINER COOL.
WATER SPRAY MAY BE USED TO FLUSH SPILLS AWAY FROM EXPOSURES.
Unusual Fire/Explosion Hazard:WATER OR FOAM MAY CAUSE FROTHING.

Accidental Release

Spill Release Procedures:USE INERT ABSORBENT MATERIAL TO CONFINE SPILLS
AND TO ABSORB MATERIAL. SCOOP INTO A DISPOSABLE CONTAINER.

Handling

Handling and Storage Precautions:NO APPLICABLE INFORMATION FOUND
Other Precautions:NO APPLICABLE INFORMATION FOUND

Exposure Controls

Respiratory Protection:ADEQUATE VENTILATION OR NIOSH/MSHA APPROVED
RESPIRATORS TO MEET EXPOSURE LIMITS.
Ventilation:ADEQUATE VENTILATION
Protective Gloves:GLOVES
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:USE GLOVES OR PROTECTIVE CLOTHING TO PROTECT
SKIN
Work Hygienic Practices:NONE PROVIDED BY MFR.
Supplemental Safety and Health
NONE PROVIDED BY MFR.

Chemical Properties

HCC:V6
Boiling Pt:>293.C, 559.4F
Vapor Density:>5 (AIR=1)
Spec Gravity:0.9 (WATER=1)
Solubility in Water:NO
Appearance and Odor:BLUE COLOR, LUBE OIL ODOR.
Percent Volatiles by Volume:NONE

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIANTS (AS RELATED TO GENERAL ORGANIC MATERIALS)
Stability Condition to Avoid:HEAT AND IGNITION SOURCES.
Hazardous Decomposition Products:NONE PROVIDED BY MFR.
Conditions to Avoid Polymerization:DOES NOT OCCUR

Disposal

Waste Disposal Methods:LAND FILL OR INCINERATE AS FEDERAL, STATE, AND
LOCAL REGUALTIONS PERMIT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.